Forms
A list of all forms.
Applications received by mail or post may take up to 10 working days longer to process than applications submitted through our licensing portal. The fastest way for your application to be processed is to complete it in the online licensing portal.
Electrical Workers Portal(external link)
If you are not registered or have not been set up on the licensing portal, read the following instructions:
Training
-
PDF, 159 KB
Exam entry application
-
PDF, 593 KB
3.1 Practical assessment application
-
PDF, 333 KB
2.1 Single phase appliance testing inspection and tagging sheet
-
PDF, 662 KB
2.7 Associated tradespersons single-phase (up to 250V) equipment and fittings testing, inspection and tagging sheet
-
PDF, 416 KB
2.8 Poly phase appliance testing inspection and tagging sheet
Certification forms
-
PDF, 135 KB
Electrical certificate of compliance and electrical safety certificate
Use this form when certifying installations or part installations under Part 1 or Part 2 of AS/NZS 3000.
-
PDF, 103 KB
Electrical safety certificate (A4)
Use this form when certifying prescribed electrical work under Section 74A of the Electrical (Safety) Regulations 2010.
-
PDF, 3 MB
Record of inspection (ROI) of high-risk prescribed electrical work
Use the form when certifying high risk prescribed electrical work under part 6A(2) of the Electrical (Safety) Regulations 2010.
-
PDF, 1.3 MB
Certificate of Verification
Use this form when verifying an installation that has been disconnected for more than 6 months, or when an inspector verifies PEW in accordance with AS/NZS 3019.